www. microsemi . com scottsdale division in4099ur-1 thru 1n4135ur-1 (or mll4099-1 thru mll4135-1) and 1n4614ur-1 thru 1n4627ur-1 ( or mll4614-1 thru mll4627-1 ) metallurgically bonded glass surface mount 0.5 watt zeners description appearance the 1n4099ur-1 thru 1n4135ur-1 and 1n4614ur-1 thru 1n4627ur-1 series of 0.5 watt glass surface mount do-213aa zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. these have an internal-metallurgical-bond option as identified with the ?-1? suffix. this type of internally bonded zener package construction is also available in jan, jantx, and jantxv military qualifications. microsemi also offers numerous other zener products to meet higher and lower power applications. do-213aa important: for the most current data, consult microsemi?s website: http://www.microsemi.com features applications / benefits ? surface mount equivalent to jedec registered 1n4099 thru 1n4135 and 1n4614 thru 1n4627 series ? internal metallurgical bond with the ?-1? suffix ? nonbonded types also available without the ?-1? suffix for both the axial and surface mount packages (see separate data sheets) ? do-7 or do-35 glass body axial-leaded zener equivalents also available per jedec registration with part numbers 1n4099 thru 1n4135 and 1n4614 thru 1n4627 on separate data sheets ? rohs compliant devices available by adding ?e3? suffix ? regulates voltage over a broad operating current and temperature range ? extensive selection from 1.8 to 100 v ? standard voltage tolerances are plus/minus 5% with no suffix ? tight tolerances available in plus or minus 2% or 1% with c or d suffix respectively ? hermetically sealed surface mount package ? nonsensitive to esd per mil-std-750 method 1020 ? minimal capacitance (see figure 3) ? inherently radiation hard as described in microsemi micronote 050 maximum ratings mechanical and packaging ? operating and storage temperature: -65 o c to +175 o c ? thermal resistance: 100 o c/w junction to end cap, or 250 o c/w junction to ambient when mounted on fr4 pc board (1 oz cu) with recommended footprint (see last page) ? steady-state power: 0.5 watts at end cap temperature t ec < 125 o c or at ambient t a < 50 o c when mounted on fr4 pc board as described for thermal resistance above (see figure 2 for derating) ? forward voltage @200 ma: 1.1 volts ? solder temperatures: 260 o c for 10 s (max) ? case: hermetically sealed glass do-213aa (sod80 or mll34) melf style package ? finish: end caps tin-lead (sn/pb) or rohs compliant annealed matte-tin plating solderable per mil-std-750, method 2026 ? polarity: cathode indicated by band where diode is to be operated with the banded end positive with respect to the opposite end for zener regulation ? marking: cathode band only ? tape & reel option: standard per eia-481-1-a with 12 mm tape, 2000 per 7 inch reel or 5000 per 13 inch reel (add ?tr? suffix to part number) ? weight: 0.04 grams ? see package dimensions on last page 1n4099ur-1?1n4135ur-1 1n4614ur-1 ? 1n4627ur-1 , e3 microsemi scottsdale division page 1 copyright ? 2006 3-30-06 rev d 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
www. microsemi . com scottsdale division in4099ur-1 thru 1n4135ur-1 (or mll4099-1 thru mll4135-1) and 1n4614ur-1 thru 1n4627ur-1 ( or mll4614-1 thru mll4627-1 ) *electrical characteristics @ 25 o c nominal zener voltage v z @ i zt (note 2) zener test current i zt maximum zener impedance z zt (note 3) maximum reverse current i r @ v r maximum noise density n d @ i zt maximum zener current i zm typical temp.coeff. of zener voltage vz industry part number (note 1) microsemi part number (note 1) volts a ohms a volts v/ hz ma %/ o c 1n4614ur-1 1n4615ur-1 1n4616ur-1 mll4614-1 mll4615-1 mll4616-1 1.8 2.0 2.2 250 250 250 1200 1250 1300 3.5 2.5 2.0 1.0 1.0 1.0 1 1 1 120 110 100 -0.075 -0.075 -0.075 1n4617ur-1 1n4618ur-1 1n4619ur-1 1n4620ur-1 mll4617-1 mll4618-1 mll4619-1 mll4620-1 2.4 2.7 3.0 3.3 250 250 250 250 1400 1500 1600 1650 1.0 0.5 0.4 3.5 1.0 1.0 1.0 1.5 1 1 1 1 95 90 87 85 -0.075 -0.075 -0.075 -0.075 1n4621ur-1 1n4622ur-1 1n4623ur-1 1n4624ur-1 mll4621-1 mll4622-1 mll4623-1 mll4624-1 3.6 3.9 4.3 4.7 250 250 250 250 1700 1650 1600 1550 3.5 2.5 2.0 5.0 2.0 2.0 2.0 3.0 1 1 1 1 83 80 77 75 -0.065 -0.060 -0.050 -0.040,+0.020 1n4625ur-1 1n4626ur-1 1n4627ur-1 1n4099ur-1 mll4625-1 mll4626-1 mll4627-1 mll4099-1 5.1 5.6 6.2 6.8 250 250 250 250 1500 1400 1200 200 5.0 5.0 5.0 1.0 3.0 4.0 5.0 5.17 2 4 5 40 70 65 61 56 -0.045,+0.030 -0.020,+0.040 -0.010,+0.050 0.040 1n4100ur-1 1n4101ur-1 1n4102ur-1 1n4103ur-1 mll4100-1 mll4101-1 mll4102-1 mll4103-1 7.5 8.2 8.7 9.1 250 250 250 250 200 200 200 200 1.0 0.5 0.5 0.5 5.70 6.24 6.61 6.92 40 40 40 40 51 46 44 42 0.045 0.048 0.049 0.050 1n4104ur-1 1n4105ur-1 1n4106ur-1 1n4107ur-1 mll4104-1 mll4105-1 mll4106-1 mll4107-1 10 11 12 13 250 250 250 250 200 200 200 200 0.5 .05 .05 .05 7.60 8.44 9.12 9.87 40 40 40 40 38 35 32 29 0.055 0.060 0.065 0.065 1n4108ur-1 1n4109ur-1 1n4110ur-1 1n4111ur-1 mll4108-1 mll4109-1 mll4110-1 mll4111-1 14 15 16 17 250 250 250 250 200 100 100 100 .05 .05 .05 .05 10.65 11.40 12.15 12.92 40 40 40 40 27 25 24 22 0.070 0.070 0.070 0.075 1n4112ur-1 1n4113ur-1 1n4114ur-1 1n4115ur-1 mll4112-1 mll4113-1 mll4114-1 mll4115-1 18 19 20 22 250 250 250 250 100 150 150 150 .05 .05 .01 .01 13.67 14.44 15.20 16.72 40 40 40 40 21 20 19 17 0.075 0.075 0.075 0.080 1n4116ur-1 1n4117ur-1 1n4118ur-1 1n4119ur-1 mll4116-1 mll4117-1 mll4118-1 mll4119-1 24 25 27 28 250 250 250 250 150 150 150 200 .01 .01 .01 .01 18.25 1900 20.45 21.28 40 40 40 40 16 15 14 14 0.080 0.080 0.085 0.085 1n4120ur-1 1n4121ur-1 1n4122ur-1 1n4123ur-1 mll4120-1 mll4121-1 mll4122-1 mll4123-1 30 33 36 39 250 250 250 250 200 200 200 200 .01 .01 .01 .01 22.80 25.08 27.38 29.65 40 40 40 40 13 12 11 9.8 0.085 0.085 0.090 0.090 1n4124ur-1 1n4125ur-1 1n4126ur-1 1n4127ur-1 mll4124-1 mll4125-1 mll4126-1 mll4127-1 43 47 51 56 250 250 250 250 250 250 300 300 .01 .01 .01 .01 32.65 35.75 38.76 42.60 40 40 40 40 8.9 8.1 7.5 6.7 0.090 0.090 0.090 0.090 1n4128ur-1 1n4129ur-1 1n4130ur-1 1n4131ur-1 mll4128-1 mll4129-1 mll4130-1 mll4131-1 60 62 68 75 250 250 250 250 400 500 700 700 .01 .01 .01 .01 45.60 47.10 51.68 57.00 40 40 40 40 6.4 6.1 5.6 5.1 0.090 0.090 0.095 0.095 1n4132ur-1 1n4133ur-1 1n4134ur-1 1n4135ur-1 mll4132-1 mll4133-1 mll4134-1 mll4135-1 82 87 91 100 250 250 250 250 800 1000 1200 1500 .01 .01 .01 .01 62.32 66.12 69.16 76.00 40 40 40 40 4.6 4.4 4.2 3.8 0.095 0.095 0.095 0.095 1n4099ur-1?1n4135ur-1 1n4614ur-1 ? 1n4627ur-1 note 1: these may be ordered as either 1n4614ur-1 thru 1n4627ur-1 and 1n4099ur-1 thru 1n4135ur-1 or mll4614-1 thru mll4627-1 and mll4099-1 thru mll4135-1. for military types, add the jan, jantx, jantxv prefix for requir ed screening to the industry part number. , note 2: the jedec type numbers shown above have a standard tolerance of +/-5% on the nominal zener voltage. tighter tolerances are als o e3 available with c or d suffix for 2% or 1% tole rance respectively, e.g. 1n4105cur-1 for 2%. v z is measured with the diode in thermal equilibrium (still air) at 25 o c for end-cap terminations. microsemi scottsdale division page 2 note 3: zener impedance is derived by superimposing on i zt a 60 hz rms ac current at 10% of i zt . see micronote 202 for z zt variation with i z . copyright ? 2006 3-30-06 rev d 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
www. microsemi . com scottsdale division in4099ur-1 thru 1n4135ur-1 (or mll4099-1 thru mll4135-1) and 1n4614ur-1 thru 1n4627ur-1 ( or mll4614-1 thru mll4627-1 ) graphs and circuit p d rated power dissipation (mw) t ec t a t ec , end cap temperature ( o c) or t a ambient temperature on fr4 pc board figure 2 power derating curve capacitance vs. v z curve figure 1 noise density measurement circuit microsemi scottsdale division page 3 copyright ? 2006 3-30-06 rev d 1n4099ur-1?1n4135ur-1 1n4614ur-1 ? 1n4627ur-1 , e3 figure 3 capacitance vs. zener voltage (typical) zener voltage v z typical c apacitance i n p icofarads (pf) noise density, (n d ) is specified in mi crovolt-rms per squre- root-hertz. actual measurement is performed using a 1 khz to 3 khz frequency bandpass filter at a constant zener test current (i zt ) at 25 o c ambient temperature. n d is calculated from the formula. package dimensions inches millimeters dim min max min max a 0.063 0.067 1.60 1.70 b 0.130 0.146 3.30 3.70 c 0.016 0.022 0.41 0.55 pad layout inches mm a .200 5.08 b .055 1.40 c .080 2.03 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
|
